• The forum software have been upgraded to the latest version.

    If you notice anything that looks off, or does not work, please let us know.

    For more information, click here.

Articles to print in 3D - Lizardmen / Seraphon

Unoalazar said:
I would love that link, it would be very helpful for me and for the community. What I want most, is the model of the Dread saurian of total war. it is the best design ever made, even better than that of forgeworld.
Click to expand...

Someone made a 3d model based on the total war model.

https://www.thingiverse.com/thing:3856028

His youtube video about it actually inspired me to buy a 3d printer.

 
Causes Chaos said:
Are you going to take these into ZBrush & texture them? I'm eyeing up the DS but if your half way through it I wont bother :)
Click to expand...

Currently I am working on the saurus warriors first since that is the more or less the core of the army, I am 90% done and working on the rigging for various poses with both spears and clubs, after that it will be guard since that just cleaning up the armor and weapons and then the knights, after that I am unsure which order I am going in but I plan to get the kroxigors,salamanders, razordons and chameleon skinks done before moving to character and the dread saurian, it will take a but since I am learning all this stuff and I am doing it in my free time.If you want to do the retexture of the dread saurian I'll post the texture skins when I get off work.
 
If the work is divided, it will be easier to finish everything. Just remember that in order for the details to look good on the prints, they must be well marked.

When you think you have marked enough, then you should highlight it more.

===========

I am working on the design of an Old One.

BD1ADF98-6D67-4238-8010-44C813BCAFF7.gif
 
SirKillingtonIV said:
Currently I am working on the saurus warriors first since that is the more or less the core of the army, I am 90% done and working on the rigging for various poses with both spears and clubs, after that it will be guard since that just cleaning up the armor and weapons and then the knights, after that I am unsure which order I am going in but I plan to get the kroxigors,salamanders, razordons and chameleon skinks done before moving to character and the dread saurian, it will take a but since I am learning all this stuff and I am doing it in my free time.If you want to do the retexture of the dread saurian I'll post the texture skins when I get off work.
Click to expand...

I'll be learning it too, will be in Blender instead of ZBrush, i'll go get my drawing tablet! You in the Seraphon whatsapp chat?
 
I've been looking into 3D Printers mostly for the gorgeous Lost Kingdom Models. In my own personal research (about 15 websites ranking top 10 3D Printers for tabletop miniatures) it looks like Elegoo Mars and the AnyCubic Photon S are vying for dominance. Any thoughts yourselves? Also a friend recommend a familiarize myself with Cura and/or Blender? Are these programs required to read .stl format in order to send it to my printer (I'm guessing via USB). I'm not really sure what the purpose of Blender or Cura is. I'm not 3D modeler myself and have no desire to "improve" upon Lost Kingdom's immaculate work.
 
Krissey said:
I've been looking into 3D Printers mostly for the gorgeous Lost Kingdom Models. In my own personal research (about 15 websites ranking top 10 3D Printers for tabletop miniatures) it looks like Elegoo Mars and the AnyCubic Photon S are vying for dominance. Any thoughts yourselves? Also a friend recommend a familiarize myself with Cura and/or Blender? Are these programs required to read .stl format in order to send it to my printer (I'm guessing via USB). I'm not really sure what the purpose of Blender or Cura is. I'm not 3D modeler myself and have no desire to "improve" upon Lost Kingdom's immaculate work.
Click to expand...
Dont worry about Cura (slicer) for Resin. Blender is more for making your own sculpts. Fusion 360 is good for making odd utility bits & adjusting things. Otherwise you'll be looking at Chitubox

I've got an Elegoo Mars, Honestly the difference between the two is just the price point & I think the Anycubic comes with Resin, the elegoo doesnt. So by the time you slap on 500g of resin its the same price any way.

If you just want to print LK minis to start, all you'll need is a printer & the slicer software that is recommended for the printer. (Which you can download for free online)
 
Causes Chaos said:
Dont worry about Cura (slicer) for Resin. Blender is more for making your own sculpts. Fusion 360 is good for making odd utility bits & adjusting things. Otherwise you'll be looking at Chitubox

I've got an Elegoo Mars, Honestly the difference between the two is just the price point & I think the Anycubic comes with Resin, the elegoo doesnt. So by the time you slap on 500g of resin its the same price any way.

If you just want to print LK minis to start, all you'll need is a printer & the slicer software that is recommended for the printer. (Which you can download for free online)
Click to expand...

Well maybe not *exclusively* Lost Kingdom Miniatures. Thingiverse has some terrain stuff I can add to basing materials (like plants, rocks, skulls, etc..) and I have bought at least 4 things from HeroForge so I could at this point create my own heroforge things. That said, yeah I guess just a slicer software and the printer. I reckon I'll get the AnyCubic Photon S, some eye protection, box of gloves and some sort of mask.
 
Ok the dread saurian body texture is up it's a bmp file so you might have to convert that to something else for blender.
 
You must log in or register to reply here.
Back
Top